Generating time resolved plot data
The ADS CFD system allows the user to plot time resolved data during time accurate simulation with the following restrictions:
- Feature only works for OHH meshes
- Output plots are in Tecplot format
To enable time-resolved plotting you must set the ITIME variable in the 1st passage LEO setup file to 6. Time resolved plotting also requires additional flags to be set in DIVISION 4 of the 1st passage LEO setup file:
Once you have made these changes to the first passage .LEO file, execute the simulation.
When the simulation completes, three Tecplot-formatted files are generated:
-I-TIME.PLOT -J-TIME.PLOT -K-TIME.PLOT